CALL US: 702-425-7853

CrownSMGM Series GrandMini Dual Head

XM8 Series GrandMini Dual Head

XM8 Series GrandMini Dual Head

XM8, the laser industry innovator…

The best, feature rich laser system ever built

Engineered to take the best of many existing laser systems innovative but poorly implemented features and enhance them to develop a laser system that works around you, not you having to work around it. From the completely removable front and rear panels to provide a FULL width pass through cabinet, to the lighting system that always illuminates your working area, to the simple but effective test mode to ensure projects are perfectly lined up with substrates and many other highly useful but simple features. In its simplistic approach this laser system is equipped with features designed to boost overall productivity at an affordable price!

The laser system by which all others are measured!

Standard features include: Set Home Origin, FULL Width Pass-Thru (Front/Rear Panels or Side by Side), Red Diode Focusing Method, Project Test Mode, Internal LED Lighting, Removable Doors, Emergency Stop, Slat Table vs. the outdated and short lived honeycomb table, Programmable Origin, DEEP Table, HUGE Work Area, HIGH Wattage, Air Assist, Easy & FAST Laser Tube Upgrade, User Friendly Control Panel, High Speed Reliable Motion System, Advanced Vector Modes, Intelligent Rubber Stamp Engraving, Multiple/single job selection, System SAVES files EVEN when shut down, ENGRAVE or CUT in a single job. NOTE: These are standard features that the others SOMETIMES if even available provide at a price, ours is included!

2 Laser Beams
Two lens' available, double production, double profit. Simply Profitable!

2 Laser Tubes
A laser tube PER lens assembly, AWESOME! Full power per lens!

HUGE Table
55in x 37in table, split in half is still a HUGE work area. Simply Productive!

Full Speed
With such high power available, full speed is possible Simply brilliant!

Programmable Origin
Easy-to-use position modes allow an effortless way to setup a job. Simply Easy!

Full Pass-Thru
Removable front and rear panels to accommodate long materials. Simply Innovative!

Red Diode Focal
No other auto focus works this accurately, focus is precise. Simply Precise!

Test Mode
Unique Test mode, easily ensure project lines up with substrate, every time. Simply brilliant!

Internal Lighting
Integrated internal light system for easy viewing. Simply Convenient!

Removable Doors
Quickly and easily access all components of the entire laser system. Simply Common Sense!

Emergency Stop
Instantly stop the laser from firing and the lens from moving in an emergency. Simply Safe!

Slat Table
Quick and efficient cutting table, will not wear, bend, or mark materials. Simply Effective!

XM8draw
Easy to use laser software or interface into Corel or AutoCADSimply Important!

Deep Table
A full 13" deep table to accomodate most products for HUGE products. Simply Necessary!

HIGH Wattage
Combine your choice of 60/60w to 120/100w and anything in between. Simply Powerful!

HIGH Profits
Dual high power at affordable costs equals high productivity & high profits! Simply Affordable!
XM8 ModelGrandMini Dual Head
XM8 ModelGrandMini Dual Head
HIGH Laser PowerAny combination of 60w, 80w, 100w, 130w
(60/60-130/100)
Laser SourceGlass CO2 laser tube
Single or Dual laser tube?Dual CO2 laser tubes.
One laser tube per lens assembly!
MASSIVE Engraving Area55.1 x 37.4in
Dual tables: Each Area?35.43 x 25.6in
FULL width Pass-Thru55+" wide x ANY length
Communication InterfaceUSB 2.0
Engraving Speed63in/s
Work table max. DEPTH13in (motorized)
Motorized Auto FocusYes (dual red diode pointers for each lens assembly)
Lens manual adjust range1.1in
Minimum shaping character0.04 x 0.04in
Resolution Ratio0.001in (1000dpi)
Resetting PositionAccuracy less than or equal to 0.004in
Power Supply220v +/-10% 50Hz
110V compatibleNo, not available
Power Consumption2000W
Operating Temperature32° - 113°F
Operating Humidity95° - 158°F
Software SupportedXM8draw*, CorelDRAW, AutoCAD
(CDR and AC interface require select versions)
Graphic Format SupportedVector format: DXF/AI/PLT/DST
Bitmap format: JPG/TIF/PCX/PNG/TGA
Operating System SupportedWindows XP/Seven (7)/Eight (8)
32-bit or 64-bit SupportYes / Hardware and Operating System
Cylindrical object engravingNo, not available
System safety ratingClass I laser, Class III with red pointer
Exhaust VentilationExhaust blower requires outdoor access
Air AssistYes, plumbing standard, compressor required
Cooling MethodWater Cooled
Water CirculatorRequired (optional chiller recommended)
Laser Tube LifeField Tested: Avg. 3-4 years (use type dependent)
Laser System Warranty24 months | 2 years
Laser Tube Warranty12 months | 1 year
Optics WarrantyThree (3) months
Onsite installation & trainingIncluded (travel expenses as well!)
TestimonialsCUSTOMER COMMENTARY

Specifications subject to change without notice. Images may differ from actual shipping product.