XM8 Series Bishop2
XM8, the laser industry innovator… The best, feature rich laser system ever built
The laser system by which all others are measured!
Set Home Origin
Move the lens carriage to the desired position and proceed with engraving. Simply Simplistic!
Removable front and rear panels to accommodate long materials. Simply Innovative!
Red Diode Focal
No other auto focus works this accurately, focus is precise. Simply Precise!
Unique Test mode, easily ensure project lines up with substrate, every time. Simply brilliant!
Integrated internal light system for easy viewing. Simply Convenient!
Quickly and easily access all components of the entire laser system. Simply Common Sense!
Instantly stop the laser from firing and the lens from moving in an emergency. Simply Safe!
Quick and efficient cutting table, will not wear, bend, or mark materials. Simply Effective!
Easy-to-use position modes allow an effortless way to setup a job. Simply Easy!
The deepest table in the industry! A full 10" for HUGE products. Simply Necessary!
Large 16"x2' work area providing plenty of production space. Simply Productive!
Up to 60 watts at an affordable price. ROI in record time! Simply Affordable!
Click to to change image:
|Photo Gallery||CLICK TO VIEW PHOTOS...|
|HIGH Laser Power||60 watt||50 watt|
|Laser Source||Glass CO2 laser tube|
|Work Area||11.81 X 23.62in|
|FULL width Pass-Thru||ANY Width x 11.81in Length x 13.75in deep!|
|Communication Interface||USB 2.0|
|Cutting Depth (acrylic)||5/8in||1/2in|
|Work table max. DEEP depth||13.75in (motorized)|
|Table is removable?||Optional from factory (allows for nearly unlimited clearance)|
|Without table depth||Clearance with table removed = 34.5"|
|Optional stand||Yes / without table + optional stand clearance = 48"|
|Lens manual adjust range||1.1in|
|Motorized Auto Focus||Yes (dual red diode pointers)|
|Minimum shaping character||0.04 x 0.04in|
|Resolution Ratio||0.001in (1000dpi)|
|Resetting Position||Accuracy less than or equal to 0.004in|
|Power Supply||220v +/-10% 50Hz|
|110V compatible||Yes. 220V, Single phase, 20amp recommended|
|Operating Temperature||32° - 113°F|
|Operating Humidity||95° - 158°F|
|Software Supported||XM8draw*, CorelDRAW, AutoCAD
(CDR and AC interface require select versions)
|Graphic Format Supported||Vector format: DXF/AI/PLT/DST
Bitmap format: JPG/TIF/PCX/PNG/TGA
|Operating System Supported||Windows XP/Seven (7)/Eight (8)|
|32-bit or 64-bit Support||Yes / Hardware and Operating System|
|Cylindrical object engraving||Yes (with optional rotary)|
|System safety rating||Class I laser, Class III with red pointer|
|Exhaust System||Exhaust blower requires outdoor access|
|Air Assist||Yes, plumbing standard, compressor required|
|Cooling Method||Water Cooled|
|Water Circulator||Required (optional chiller recommended)|
|Laser Tube Life||Field Tested: Avg. 3-4 years (use type dependent)|
|Laser System Warranty||24 months | 2 years|
|Laser Tube Warranty||12 twelve | 1 year|
|Optics Warranty||Three (3) months|
|Onsite installation and training||Included (travel expenses as well!)|
|Equipment Dimensions||44 x 28 x 39in|
|Dimensions w/ Tube Cover||+12in|
|Shipping Dimensions||53 x 34 x 40in|
XM8 Bishop2 Brochure (2.7 MiB, 654 hits)
Specifications subject to change without notice. Images may differ from actual shipping product.